PS/2 Bumpbar and Repair Kits
Our new Bumpbar and repair kit has some new and unique features
- Injection Molded Black Nylon, very durable
- Withstands high temperatures
- Flexible where needed to take constant usage
- Metal-Domeless membrane; Don't be fooled, there are no domes to fall out.
- Long switch tail; 4.5" tail for easier changes and repairs
- Sound selectable PCB, turn off the sound if you want
- User Changeable PS/2 cable via the ACCESS door on the back of the keypad
- Uses paper insert overlays
- Light weight material, less expensive to ship and own!
- The repair kit can repair a QSR(tm) keypad by reusing their circuit board in our housing
- Up to a 300' PS/2 cable to some controllers
- DOS and Windows(tm) compatible, NO emulation codes sent from our keypad, just standard PS/2
- Supports Scancodes 1 and 2 as defined by IBM (tm), with your controller able to choose. Defaults to SC2
- We can custom-map keys for your specific application, contact us for key-reassignment options
Dealer inquiries invited.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Important Information:
KRS Corporation, LLC is not affiliated with QSR Automations or its products. Any trademarks of other parties, including QSR Automations, are the
property of their respective owners. The marks of QSR Automations, ePic are federally registered trademarks of QSR Automations, Inc.
We feel that QSR Automations, Inc.(TM) has fine products, in no way do we want to dishonor them by implying that they do not. We feel that there is a
need for a upgraded keypad solution and a repair kit, and we believe we now offer it. You, as the user, now have a choice, where before you did not.
We state this because we want to, not because we were asked to or required to. If we have stated something incorrectly, please let us know and we will
correct it.
Products continue to not be available to customers in KY, sorry, we also continue to not offer the membrane switches or the black overlays as separate
items.
Subject to our Terms and Conditions any and all information subject to change without notice.
KRS Corporation, LLC is not affiliated with QSR Automations or its products. Any trademarks of other parties, including QSR Automations, are the
property of their respective owners. The marks of QSR Automations, ePic are federally registered trademarks of QSR Automations, Inc.
We feel that QSR Automations, Inc.(TM) has fine products, in no way do we want to dishonor them by implying that they do not. We feel that there is a
need for a upgraded keypad solution and a repair kit, and we believe we now offer it. You, as the user, now have a choice, where before you did not.
We state this because we want to, not because we were asked to or required to. If we have stated something incorrectly, please let us know and we will
correct it.
Products continue to not be available to customers in KY, sorry, we also continue to not offer the membrane switches or the black overlays as separate
items.
Subject to our Terms and Conditions any and all information subject to change without notice.
General Manager quoted after his restaurant was upgraded with the TDS keypads;
“These new keypads are freaking awesome, we should have installed them a long time ago.”
“These new keypads are freaking awesome, we should have installed them a long time ago.”
“The TDS Keypad & Repair Kits are very cost effective and make repairs at
(major restaurant chain) very quick and simple; I HIGHLY recommend that you
consider adding these…”
(major restaurant chain) very quick and simple; I HIGHLY recommend that you
consider adding these…”
This quote was from a POS Manager for a very large restaurant franchise group;
3 Modes of operation selectable in our latest firmware
Mode 1: Each key press sends one character to the controller
Press button 1; get the character 1 on the screen
This is default mode
Mode 2: Same as Mode 1, with the last key (20) changed to a
Carriage Return (Enter)
Mode 3: Each key press sends two characters to the controller
-The key pressed character and a Carriage Return
Press button 1; get the character 1 with a CR
Mode 1: Each key press sends one character to the controller
Press button 1; get the character 1 on the screen
This is default mode
Mode 2: Same as Mode 1, with the last key (20) changed to a
Carriage Return (Enter)
Mode 3: Each key press sends two characters to the controller
-The key pressed character and a Carriage Return
Press button 1; get the character 1 with a CR
| C:>1234567890abcdefghij_ |
| C:>1234567890abcdefghi C:>_ |
| C:>1 C:>2 C:>3 C:>4 C:>5 C:>_ |
Example
Example pressing keys 1 to 5
Example
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||